Custom Plush Fleece Jackets: Oil Repellent, 3 in 1
Custom plush fleece jackets in a water and oil repellent shell: detachable wide brim hood, 280 gsm plush liner, zipped pockets, S to 5XL, 9 colours.
craftsmanship. Contact us for quotation!
How the 3 in 1 system works
Custom plush fleece jackets are built on one simple idea: a coat that covers three kinds of weather. The shell and the plush fleece liner each wear on their own, and they also zip together into one warm jacket. Wear the liner alone on a mild autumn day, the shell alone when it is wet but not yet cold, and join the two when the temperature drops. The liner fixes inside the shell with zips at the front and at each cuff, so the two line up in seconds and stay that way. For a team that works outdoors right through winter, that means one purchase instead of two coats, and custom plush fleece jackets that stay useful from October to March.

The shell and what it keeps out
The shell is woven from a high-density 100% polyester, fine and tight enough to cut the wind without going stiff. There is no stretch in the cloth, so the jacket holds its shape instead of sagging at the elbows after a season of wear. A water and oil repellent finish sits on the face: rain, sleet and light snow bead up and roll off, and spilt oil, coffee or grease wipes away instead of soaking in, which is why custom plush fleece jackets hold up as a team layer in a workshop or a canteen. Be clear on the limit, though. This is a water repellent shell, not a waterproof rain jacket, so it shrugs off drizzle, mist and a short shower, while hours of heavy rain would still call for a proper rain coat.

Hood, placket and pockets
Buyers look at the details first on custom plush fleece jackets. The hood is detachable and cut with a wider brim, so the edge stands out from the face and keeps rain and snow off your eyes instead of running down your neck. A drawcord runs through the hood edge and ends in a plastic cord lock at each side, so you can cinch it down in wind. The front closes with a full-length zip up to the collar, covered by a storm placket held by two snaps at the top and one at the bottom, which stops the flap lifting in a gust. Two zipped multi-purpose pockets sit low at the front, each with a horizontal flap above it, deep enough for a phone and keys and closed enough that nothing falls out. The cuffs adjust with hook-and-loop tabs.


Fit, sizes and colours
Custom plush fleece jackets come in a unisex block with room for a sweatshirt underneath, and the shell runs from S to 5XL, so most teams can be covered from stock. Nine solid colours are held: beige, pink, dark grey, apple green, black, pea green, navy, coffee and red. Solid shades take a logo cleanly and make a group look tidy on site, which is often what decides the choice. The plush liner is a stand collar with a full-length front zip and a 280 gsm weight, warm on its own and warmer under the shell. Please check the size chart before ordering.

Putting your logo on it
On a garment like this we suggest print rather than embroidery, and it is worth knowing why. A finished jacket is already lined, so embroidering the chest means opening up the shell and working around the liner, which adds handling time and pushes the price up. Heat transfer print and screen print sit on the face of the cloth instead, hold sharp detail on a fine woven surface, and keep the cost steady. Send us the artwork and the position and we will come back with the method and the size that suits the fabric. If the stocked colours and sizes do not cover your group, custom plush fleece jackets can be made in your own colourway and size run.


Specification sheet
| Attribute | Specification |
|---|---|
| Type | 3 in 1 jacket (shell plus zip-out plush fleece liner) |
| Wearing modes | Shell only, liner only, or both zipped together |
| Shell fabric | High-density woven, no stretch |
| Shell composition | 100% polyester |
| Shell finish | Water and oil repellent |
| Liner fabric | Plush fleece |
| Liner weight | 280 gsm |
| Liner composition | 100% polyester |
| Liner style | Stand collar, full-length front zip |
| Hood | Detachable, wide brim, drawcord with a plastic cord lock at each side |
| Front | Full-length zip to the collar with a storm placket, two snaps at the top and one at the bottom |
| Pockets | Two zipped multi-purpose pockets with horizontal flaps |
| Cuffs | Adjustable, hook-and-loop tabs |
| Weather resistance | Wind resistant, water repellent (not waterproof), oil and stain repellent |
| Fit | Unisex (S to 5XL) |
| Size range | S to 5XL |
| Stock colours | 9: Beige, Pink, Dark Grey, Apple Green, Black, Pea Green, Navy, Coffee, Red |
| Optional liner | Down liner available on request |
| Decoration | Heat transfer print, screen print (print recommended on a lined shell) |
| Care | Machine wash cold, mild detergent, do not bleach, hang dry, low iron, wash the two layers separately |

FAQ
Q: How does the 3 in 1 work?
The plush fleece liner zips into the shell at the front and at each cuff. Wear the shell alone, the liner alone, or both together, so one jacket covers mild, wet and cold days.
Q: Is this jacket waterproof?
No. The shell has a water and oil repellent finish that sheds drizzle, sleet, light snow and spilt oil, but it is not a waterproof or rainproof garment. For steady or heavy rain you would still want a proper rain shell.
Q: Does the hood come off?
Yes. The hood is detachable and has a wider brim than a plain hood, which keeps rain and snow away from your eyes. A drawcord with a plastic cord lock at each side lets you cinch it down in wind.
Q: What is the liner made of?
The liner is a 280 gsm plush fleece in 100% polyester, with a stand collar and a full-length front zip, so it works as a jacket on its own in autumn as well as under the shell.
Q: What sizes and colours does it come in?
The shell runs from S to 5XL in nine solid colours: beige, pink, dark grey, apple green, black, pea green, navy, coffee and red.
Q: Can you print or embroider a logo on it?
Yes. On a lined shell like this we recommend print: heat transfer print or screen print goes straight onto the face of the cloth. Embroidery is possible, but because the jacket is already lined it has to be worked around the liner, which adds handling time and cost.
Q: Is a down liner available?
Yes. The same shell can be supplied with a down liner in place of the plush fleece. It is an optional extra quoted separately, so contact us and we will send you photos and a price.
Q: How should I wash it?
Machine wash cold with a mild detergent, and do not bleach. Take the liner out and wash the two layers separately. Hang dry rather than tumble dry, iron on low if needed, and never press directly onto a printed logo.
Recommended Products · Popular Picks
4 items · Based on your browsing






