Two Tone Baseball Caps Manufacturer in Polyester Twill

Two tone baseball caps in 100% polyester twill. Crown in one colour, brim and top button in the second, six stitched eyelets, stiffened front, hook and loop fit, 56 to 60 cm, 12 pairs.

From $1.4 +Printing cost ? logo pattern cost depends on design &
craftsmanship. Contact us for quotation!
MOQ 300 pcs
Fabric
100% polyester twill
Composition
100% polyester
Service
In stock. Logo can be added — delivery within 15 days.
Note
Custom made from your design & fabric
Available Colors
Need help? Contact us ›

Why polyester suits two colours better than cotton

Two tone baseball caps live or die in the wash. Put two colours next to each other on a cotton cap and there is a fair chance one bleeds into the other over the first few washes, which is why so many contrast caps look muddy by the end of a season. This one is a 100% polyester twill, woven on the diagonal, and polyester takes dye into the fibre instead of leaving it sitting on the surface. The two colours stay apart for far longer. The cloth is dense as well, with enough body to hold a firm hand, so a bright crown does not go limp over the ears after a month on a shelf.

 

One colour above the brim, one colour on it

On these two tone baseball caps the colour break sits exactly where a cap is read from across a room. Everything above the brim is one colour, and the brim itself, together with the small button on top of the crown, is the second. That button does more work than it looks. Carrying the brim colour up to the top ties the two halves together, so the pair reads as one design rather than as two panels left over from different jobs. Each of the six panels has one stitched eyelet near the top, six in all, set by hand so the holes land in the same place on every cap in a run.

 

Inside the cap, and the closure at the back

Inside these two tone baseball caps, the two front panels are backed with a stiffener, which keeps a flat face for a logo instead of letting it soften down over the brow. Every inside seam is bound, so nothing raw rubs against the head and nothing frays in the wash, and a sweatband runs around the base where sweat actually collects. The closure is a strip of the same fabric finished with hook and loop. It adjusts quietly, it does not catch hair the way a metal buckle can, and it sits flat under a ponytail. The fit opens from 56 to 60 cm. Crown height is 12 cm and the brim measures 7 cm at the centre, both taken by hand, so allow 1 to 2 cm either way.

 

Twelve pairs, and four ways to set a logo

Stock colours run to twelve pairs. Because the order of the names carries the design, ours are written crown first and brim second: Orange with Black, Teal Blue with Black, Navy with Red, and so on down the list. That covers the loud end of a promo run and the quiet end of a staff cap from one page. Logos go on four ways: flat embroidery, 3D puff embroidery, screen print and heat transfer. The front panels are a single flat stiffened face, so a centred mark sits square and a small left chest badge also reads cleanly. These two tone baseball caps suit giveaways, team events, retail staff and anything where a plain cap disappears into the crowd. Where the stock pairs or the one adjustable size do not fit, we rebuild two tone baseball caps to your own pairing on a longer schedule.

 

Specification sheet

Attribute Specification
Fabric 100% polyester twill
Composition 100% polyester
Crown Six panels, one stitched eyelet near the top of each
Colour layout Crown in one colour, brim and top button in the second
Front structure Two front panels stiffened
Inside All seams bound
Sweatband Running around the inside
Brim 7 cm at the centre
Crown height 12 cm
Size One size, adjustable from 56 to 60 cm
Closure Self fabric strap with hook and loop
Colours 12 pairs, Orange with Black, Teal Blue with Black, Navy with Red, Yellow with Purple, Royal Blue with Black, Black with Yellow, Red with Royal Blue, Purple with Black, Black with Royal Blue, Navy with Orange, Green with Yellow, Navy with Burgundy
Colour order First colour is the crown, second is the brim and the top button
Decoration Flat embroidery, 3D puff embroidery, screen print, heat transfer
Care Hand wash cold, do not bleach, air dry away from direct heat, do not tumble dry, do not iron over embroidery or print
Measurement note Taken by hand, allow 1 to 2 cm difference

 

 

FAQ

Q: Will the two colours bleed into each other in the wash?

That is exactly why this cap is polyester rather than cotton. Polyester takes dye into the fibre, so one colour has far less chance to travel into the other, and the risk drops further if you wash cold and do not leave a wet cap sitting in a bag. We do not quote a fastness grade on the page, because a grade means a test on a specific batch, so ask and we will send the data with the quotation.

 

Q: Is 100% polyester going to feel hot and cheap?

A dense twill does not feel like the thin polyester people remember from cheap caps. This cloth has weight in the hand, it holds a shape rather than clinging, and it does not go shiny where it creases. Heat is handled by structure, not by the fibre: six stitched eyelets let air move, and the sweatband sits where sweat actually collects. It is not a technical wicking fabric and we do not describe it as one.

 

Q: Why does the top button follow the brim and not the crown?

Because that is what makes the pair look designed. When the button matches the crown, the cap reads as a solid colour with a coloured brim stuck on. When it matches the brim, the eye picks up two touches of the second colour, one at the front edge and one at the top, and the two halves of the cap belong together. It is a small decision that shows from ten metres away.

 

Q: Hook and loop or a metal buckle, which should we pick?

Hook and loop is quieter, sits flatter, does not catch hair and is quicker to adjust, which is why it suits staff caps and giveaways. Its weak point is lint: hair and fluff collect in the hooks over time and the grip weakens. A minute with a comb clears it, and on a cap that is worn daily expect the tape to be the first part to need replacing, usually well after a year. A metal buckle lasts longer but is harder to adjust with one hand.

Q: Will one size fit my group?

The cap is one size and the hook and loop strap opens from 56 to 60 cm, which covers most adult heads, men and women. If your group sits outside that range, or you need a fixed size with no strap, that is a pattern change rather than a stock option. Send the head measurements and the quantity and we will quote it as a custom run.

 

Q: Can the whole cap be built in our two colours instead of a stock pair?

Yes. The stock twelve pairs exist so a small order does not need a dye job, but the crown, brim, button and even the eyelet thread can be set to your own pairing on a custom run. Send the Pantone references or the two garments you need to match, and say which colour goes where, because the crown and brim are not interchangeable once the pattern is cut.

 

Q: How should the cap be washed?

Hand wash cold with a mild detergent and air dry away from direct heat. Do not bleach and do not tumble dry, because heat will distort the stiffener behind the front panels. Do not iron over embroidery or print, and keep the hook and loop closed while washing so it does not pick up fluff from the rest of the load.

WhatsApp: 8613760461446WeChat: mdy696Call: +8613760461446Telegram: askme6