Custom Five Panel Caps in Solid Cotton Twill for Men and Women

Custom five panel caps in 99.9% cotton twill with a flat front panel for embroidery. Bound inside seams, cotton sweatband, metal buckle, one size 54 to 60 cm, 18 colours.

From $1.6 +Printing cost ? logo pattern cost depends on design &
craftsmanship. Contact us for quotation!
MOQ 300 pcs
Fabric
Cotton twill (cotton drill)
Composition
99.9% Cotton
Service
In stock. Logo can be added — delivery within 15 days.
Note
Custom made from your design & fabric
Available Colors
Need help? Contact us ›

Solid cotton twill, where the cloth has to do the work

Custom five panel caps are cut from a cotton twill, 99.9% cotton, woven on the diagonal and heavy enough to sit up on the head instead of sagging round the ears. This one carries no print and no second colour, so the cloth has to hold the cap on its own, and that is the reason the weave matters more here than on a patterned cap. A tight twill keeps a flat, even face, so a solid colour reads as one clean tone across the crown instead of going patchy where the light falls. It lets air through, it takes up sweat and lets it dry again, and it survives the kind of handling a cap gets in a work bag.

 

Five panels, and a flat front where the logo goes

On these custom five panel caps the crown is built from five pieces rather than the usual six, with one wide panel across the front. That panel is the flattest surface on the cap, which is why the logo belongs there: embroidery runs level across it with no seam cutting through the mark, and a print has one continuous face to sit on. Each panel carries a small bound eyelet near the top for air, and the front panel is backed with a stiffener so the shape stands above the brow. The metal buckle opens the fit from 54 to 60 cm, wider than most caps in this class, so it takes smaller heads as well as large ones. Crown height is 12 cm and the brim measures 7 cm at its centre, both taken by hand, so allow 1 to 2 cm either way.

 

What the inside actually looks like

Turn one of these custom five panel caps inside out and the difference shows. A fine gauge knit mesh is bonded to the reverse of the shell, which gives the cotton a little more body and lets air move between the two layers rather than trapping it against the head. Every inside seam is bound, so there is no raw join or loose overlock to rub the scalp or fray in the wash, and the inside stays tidy enough to be seen. A cotton sweatband runs right around the base and sits against the forehead, where moisture actually collects. None of this is visible while the cap is worn, and all of it is what decides whether the cap still looks presentable after a year.

 

Eighteen solid colours and four ways to add a logo

Order custom five panel caps in eighteen solid colours, from Black, White and Navy through Khaki, Army Green and Coffee to Pink, Rose Red and Teal Blue, so a work uniform, an event or a retail range usually finds its tone without paying for a dye run. Logos go on four ways: flat embroidery for fine detail, 3D puff embroidery where the mark should stand off the cloth, screen print for flat graphics, and heat transfer for artwork with more colours than a screen can carry at a sensible price. Because the crown is one solid colour, a single colour logo reads cleanly from across a room, which is what most staff and event caps actually need. Where the stock colours or the one size fit does not answer the brief, custom five panel caps can be rebuilt to your own specification on a longer schedule.

 

Specification sheet

Attribute Specification
Fabric Cotton twill (cotton drill)
Composition 99.9% cotton
Crown Five panels, flat one piece front, one bound eyelet per panel
Front structure Front panel stiffened
Inside Fine gauge knit mesh bonded to the reverse of the shell, all seams bound
Brim 7 cm at the centre
Crown height 12 cm
Size One size, adjustable from 54 to 60 cm
Closure Metal buckle at the back
Sweatband Cotton, running around the inside
Colours 18 solid colours, Pale Yellow, Navy, Pink, Army Green, Coffee, Purple, Yellow, White, Black, Burgundy, Beige, Khaki, Royal Blue, Bright Red, Orange, Rose Red, Teal Blue, Light Blue
Decoration Flat embroidery, 3D puff embroidery, screen print, heat transfer
Care Hand wash cold, do not bleach, air dry away from direct heat, do not tumble dry, do not iron the embroidery
Measurement note Taken by hand, allow 1 to 2 cm difference

 

 

FAQ

Q: What is the difference between a five panel and a six panel cap?

A six panel crown meets at six seams and gives a rounder head shape, which is what most baseball caps use. A five panel crown puts one wide piece at the front, so the face of the cap is flatter and there is no vertical seam running through the middle of the forehead. If a logo needs to sit dead centre and stay unbroken, the five panel is the better pattern. Both are one size here; the five panel is a little straighter across the brow.

 

Q: How big a logo can the front panel take?

The front panel is the widest unbroken surface on the cap, with no seam crossing it, so it takes a chest style logo with room to spare on every side. Bring us the artwork at the size you intend to use and we will tell you whether it clears the eyelet and the brim seam, and shrink it only if it has to shrink. Embroidery holds fine lettering on this panel better than print does.

 

Q: Is one size really going to fit everyone?

The cap is one size and the metal buckle opens from 54 to 60 cm, so it covers most adult heads, men and women, including smaller ones. If your group sits outside that range, or you need a fixed size rather than an adjustable one, that is a pattern change rather than a stock option. Send the head measurement and the quantity and we will quote it as a custom run.

 

Q: Why is there a mesh layer inside the cap?

The mesh is bonded to the back of the cotton, which gives the shell a bit more body and lets air move between the two layers instead of sitting against the scalp. It also stops the crown from creasing where it is handled most. Combined with the cotton sweatband, it keeps the inside from turning damp and shiny over a long shift.

 

Q: Which decoration holds up best on cotton twill?

Flat embroidery is the most durable on twill, because the stitches go into the cloth rather than sitting on top of it. 3D puff embroidery adds a raised look but needs a bold mark with clear edges. Screen print gives the strongest flat colour on light shades but can crack if it is stretched over a seam. Heat transfer holds detail and many colours, and on a flat front panel it lasts well as long as washing instructions are followed.

 

Q: Are the colours consistent between orders?

We work to the same colour code, so a repeat order lands on the same shade as the first. The same dye lot every time is not something we can promise, and a slight difference between batches is normal on piece dyed cotton. If you are matching an existing uniform programme, send the cap or the Pantone reference and we will work to that instead of to our own standard.

 

Q: How should the cap be washed?

Hand wash cold with a mild detergent, then air dry away from direct heat. Do not bleach and do not tumble dry, because the stiffener in the front panel and the bonded mesh will distort in a machine. Do not iron directly over embroidery or print. For a quick refresh, spot clean the sweatband rather than washing the whole crown.

WhatsApp: 8613760461446WeChat: mdy696Call: +8613760461446Telegram: askme6