Custom Baseball Caps in Cotton Twill with a Two Tone Brim
Custom baseball caps in 99.9% cotton twill, six panels with bound eyelets and a stiffened front. Metal buckle, cotton sweatband, contrast brim edge, one size 56 to 60 cm, 17 colours.
craftsmanship. Contact us for quotation!
A cotton twill with enough body to hold a shape
Custom baseball caps are only as good as the cloth, and this one is cut from a cotton twill, the diagonal weave most people in the trade still call drill. It is 99.9% cotton, woven tight and on the heavy side, which is the point: a soft shell collapses at the front the first time it is pulled on, while this one keeps a clean line over the forehead and still lets air through. Cotton takes up sweat and lets it dry off again instead of sealing it in, so the cap stays comfortable through a long shift or a day outdoors. The diagonal weave also stands up to scuffing, which matters for something that spends half the week in a bag.

Six panels, a stiffened front and a metal buckle
The crown on these custom baseball caps is built from six panels, and each one carries a small bound eyelet near the top so warm air has somewhere to go. The front panels are backed with a stiffened buckram and the rear ones are left soft, so the cap holds its line at the forehead and still folds flat in a bag. A cotton sweatband runs right around the inside and sits against the skin, taking up moisture where it actually matters. The metal buckle at the back opens the fit from 56 to 60 cm, enough for most adult heads, so a single stock run can serve a mixed team. Crown height is 12 cm and the brim runs 7 cm at its centre. Both are measured by hand, so allow 1 to 2 cm either way.

Where the second colour actually sits
This is the detail that separates these custom baseball caps from a plain blank. The top of the brim is cut from the same cloth as the crown, and the contrast goes underneath, on the underside panel and on the binding that wraps the brim edge. Worn straight on, it reads as a solid cap with one fine line of colour running along the brim. Seen from the side, or when someone tilts their head, the second colour comes through. That carries a brand’s second colour more quietly than a fully contrasting crown does, and it keeps a group photo from looking like merchandise. If the logo has two colours, this is usually the reason to pick this cap over a one colour one.

Seventeen colourways and four ways to add a logo
Order custom baseball caps in seventeen two tone combinations, from Black with Grey and Navy with Royal Blue through Beige with Coffee to Burgundy with Navy, so most company palettes already have a match before anyone mentions dyeing. Logos go on four ways: flat embroidery for fine line work, 3D puff embroidery when the mark should stand off the cloth, screen print for flat graphics, and heat transfer for artwork with more colours than a screen can carry at a sensible price. One size keeps a team order simple, and the same cap covers everyday wear, events, promotions, staff uniforms and campaign giveaways. Where the stock colours or the one size fit does not answer the brief, custom baseball caps can be rebuilt to your own colours and details on a longer schedule.

Specification sheet
| Attribute | Specification |
|---|---|
| Fabric | Cotton twill (cotton drill) |
| Composition | 99.9% cotton |
| Crown | Six panels, one bound eyelet per panel |
| Front structure | Front panels stiffened, rear panels soft |
| Brim | 7 cm at the centre, contrast underside and bound edge |
| Crown height | 12 cm |
| Size | One size, adjustable from 56 to 60 cm |
| Closure | Metal buckle at the back |
| Sweatband | Cotton, running around the inside |
| Colour order | First colour is the crown and the brim top, second is the brim underside and edge binding |
| Colours | 17 two tone pairs, Black with Grey, Navy with Royal Blue, Grey with Orange, Black with Red, Black with Orange, Red with Black, Black with Green, Navy with White, Beige with Green, Orange with Black, Beige with Coffee, Burgundy with Navy, Sky Blue with Navy, Royal Blue with Navy, Coffee with Beige, Navy with Burgundy, Grey with Green |
| Decoration | Flat embroidery, 3D puff embroidery, screen print, heat transfer |
| Care | Hand wash cold, do not bleach, air dry away from direct heat, do not tumble dry, do not iron the embroidery |
| Measurement note | Taken by hand, allow 1 to 2 cm difference |


FAQ
Q: Is it really one size, and will it fit?
Yes. The cap is a single size and the metal buckle at the back opens it from 56 to 60 cm, which covers most adult heads, men and women. If your group runs outside that range, or you want a fitted cap rather than an adjustable one, that is a pattern change, not a stock option, so tell us the head measurement and the quantity and we will quote it as a custom run.
Q: What is cotton twill, and why use it for a cap?
Twill is a diagonal weave, and in the cap trade this weight of it is still called drill. It is denser than a plain weave at the same weight, so it holds a shape, resists scuffing and does not go see through where the crown is stretched over the stiffener. The 99.9% cotton content is what lets it breathe and take up sweat rather than sit damp on the forehead.
Q: Is the brim a different colour from the cap?
Partly, and that is the design. The top of the brim matches the crown, while the underside panel and the binding around the brim edge take the second colour. From the front it looks almost solid, with one line of colour on the brim edge; from the side the contrast reads clearly. If you would rather have a fully contrasting brim, that is available as a custom detail.
Q: Which logo method should I choose?
Flat embroidery for a mark with fine lines or small lettering, because it holds detail at a small size. 3D puff embroidery when you want the logo to sit proud of the cloth, which suits bold marks of three or four colours. Screen print for flat, high contrast graphics, and heat transfer when the artwork has more colours than a screen setup can justify. Send the artwork and we will tell you which one holds up best on twill.
Q: Are the colours consistent between orders?
We hold to the same colour code, so a repeat order lands on the same shade as the first one. We cannot promise the same dye lot every time, and a slight difference between batches is normal in piece dyed cotton. If you are matching an existing uniform programme, send us the cap or the Pantone reference and we will work to that rather than to our own standard.
Q: How should a cotton cap be washed?
Hand wash in cold water with a mild detergent and let it air dry away from direct heat. Do not bleach and do not tumble dry, because the stiffener in the front panels will distort in a machine. Do not iron directly over embroidery or a print. If the cap only needs a refresh, spot clean the sweatband rather than washing the whole crown.
Recommended Products · Popular Picks
4 items · Based on your browsing




