Wholesale Baseball Jackets: Fleece-Backed, Concealed Zip
Wholesale baseball jackets in a 400 g fleece-backed cotton knit: rib collar, cuffs and hem with a double contrast stripe, concealed zip, two side pockets. XS to 4XL, six colours.
craftsmanship. Contact us for quotation!
What these jackets are made of
These wholesale baseball jackets are cut from a single piece of 400 g double-faced knit: cotton on the outside, brushed polyester fleece on the inside. It is one cloth, not a shell with a lining stitched in, so nothing shifts or bunches between layers. The cotton face is knitted from a 40s yarn, which gives the surface a smooth, soft hand, and the fleece back is brushed up into a fine nap that traps a layer of air against you, so you stay warm without the bulk of a padded coat. Cotton on the outside also breathes, which matters on a warm afternoon or indoors. Wash it as normal and it holds its size rather than shrinking out of fit.


Striped rib trims and a concealed zip
The collar, cuffs and hem on these wholesale baseball jackets are all cut in a knitted rib in the same colour as the body, each one carrying two slim 1 cm contrast stripes. That striped rib is the detail that makes it read as a baseball jacket rather than a plain zip-through sweat. The collar is a short stand collar, so it sits up at the neck instead of pressing against your chin, and it is trimmed inside with a webbing tape in the body colour that covers the raw seam when the jacket is open. Down the front runs a full-length concealed zip, set reverse coil with the flat face out, so the nylon teeth stay hidden behind the fabric and the front keeps one clean line for a chest logo.

Fit, sizing and colours
The cut is a unisex regular fit with a set-in shoulder, so the seam sits on the shoulder point rather than dropping down the arm, and the front hangs straight from chest to hem. Sizes run XS to 4XL, which covers most staff and event groups without a special run, and six colours are held in stock: heather grey, white, black, red, light blue and army green. If none of those suits your brief, these wholesale baseball jackets can be made in your own colour and size run. Because the shoulder is set in rather than dropped, the jacket keeps a clean line across a range of builds, which makes a team order simpler to size. Please check the size chart before ordering.

Where these jackets earn their keep
These wholesale baseball jackets fill the gap between a hoodie and a coat. For daily wear they are the jacket you reach for when a sweatshirt is not warm enough and a padded coat is too much, and the clean single-colour front keeps them easy to wear with almost anything. Teams order these wholesale baseball jackets as staff uniform for drivers, warehouse and shop floor crews, because the cotton outer takes a hard wash and still looks tidy. They also work as event and campaign pieces: bright red or light blue with a printed back reads across a room, and the fleece back means people keep wearing them long after the event.

Putting your logo on them
These wholesale baseball jackets take embroidery very well, and that is what we suggest first: a chest badge, a sleeve mark or a back wordmark all sit flat on the cotton knit and hold their shape. Screen print and heat transfer print also work, and both suit flat, solid artwork or a larger design across the back. If your artwork is fine or heavily detailed, send it over and we will tell you before we start whether it will read clearly on a 400 g knit, then run a sample so you can judge it on the cloth rather than on a screen. Send us the artwork and we will recommend the method that suits it.

Specification sheet
| Attribute | Specification |
|---|---|
| Fabric | 400 g single-layer double-faced knit: cotton face, brushed polyester fleece back |
| Face | 100% cotton, 40s yarn |
| Back | 100% polyester brushed fleece |
| Weight | 400 g (one piece of cloth, no separate lining) |
| Fit | Unisex regular, set-in shoulder (XS to 4XL) |
| Collar | Short ribbed stand collar with self-colour webbing tape inside |
| Zip | Full-length concealed zip, reverse coil, flat side out (nylon teeth hidden) |
| Pockets | Two slanted side pockets |
| Cuffs & hem | Knitted rib in the body colour with two 1 cm contrast stripes |
| Stock colours | 6: Heather Grey, White, Black, Red, Light Blue, Army Green |
| Size range | XS to 4XL |
| Decoration | Embroidery, screen print, heat transfer print |
| Care | Machine wash cold, mild detergent, do not bleach, hang dry or tumble dry low, low iron, do not iron directly on the logo |

FAQ
Q: Is this a baseball jacket or a varsity jacket?
It is a baseball jacket. Both styles share the ribbed striped trims and the zip front, but a varsity jacket usually has contrast sleeves and a chenille patch, while this one is a clean single colour knit with no patch. If you want the varsity look, we can add a patch as a custom detail.
Q: What is it made of?
A single-layer 400 g double-faced knit: a cotton face with a brushed polyester fleece back, knitted as one piece of cloth. The face is 40s cotton, so the surface stays smooth and soft, and the brushed back is what holds the warmth. There is no separate lining to shift or bunch.
Q: What does concealed zip mean?
The zip is set reverse coil with the flat side facing out, so the nylon teeth sit hidden behind the fabric and the front keeps one clean line. It opens and closes the same way, it just looks neater and does not catch on anything.
Q: Does it have pockets?
Yes, two slanted side pockets, one each side, set into the front panel at hip level.
Q: Can you embroider or print our logo?
Yes. Embroidery is the best fit on cotton knit, and it takes a chest badge, a sleeve mark or a back wordmark cleanly. Screen print and heat transfer print also work, and both suit flat, solid artwork. If your design is fine or heavily detailed, send it over and we will say whether it reads clearly on a 400 g knit, then run a sample so you can judge it on the cloth.
Q: How should I wash and care for it?
Machine wash cold with a mild detergent, do not bleach, hang dry or tumble dry low, and iron on a low setting. Never press directly onto a printed or embroidered logo.
Recommended Products · Popular Picks
4 items · Based on your browsing










