Custom Contrast Polo Shirts – Fake Two-Piece Hem

Custom contrast polo shirts in 200 GSM double pique, 65% cotton and 35% polyester: a contrast under-layer at the cuffs and hem, contrast inner placket and neck tape, XS to 3XL in eight colours.

From $7.8 +Printing cost ? logo pattern cost depends on design &
craftsmanship. Contact us for quotation!
MOQ 200 pcs
Fabric
Knitted mesh
Composition
65% Cotton + 35% Polyester
Service
In stock. Logo can be added — delivery within 15 days.
Note
Custom made from your design & fabric
Available Sizes
2XL 3XL L M S XL
Available Colors
Need help? Contact us ›

 200 GSM Double Pique in a Cotton-Rich 65/35 Blend

Custom contrast polo shirts live or die on the fabric, because the whole point is a clean colour break at the cuff and hem, and a body that slackens or curls ruins the effect. This one is knitted in double pique (double lacoste) at 200 GSM from 65% cotton and 35% polyester, a blend that outperforms either fibre on its own. The cotton carries the hand feel and the breathability, so it stays comfortable through a long shift. The polyester is what keeps the cuff and hem edges flat after washing, holds the contrast layer crisp instead of letting it roll, and keeps shrinkage low enough that size grading stays predictable when you re-order. At 200 GSM it sits mid-range: heavy enough to hang properly and to read as a uniform rather than a giveaway, light enough for indoor teams and summer events. It is also the weight most custom contrast polo shirts are specified at, because a lighter body will not hold a layered edge flat.

The Contrast Under-Layer at the Cuffs and Hem

The double construction at the sleeves and hem is what this shirt is about. Under each cuff and inside the hem sits a second layer cut from the same body fabric in a different colour, so the shirt reads as two pieces without being two pieces — the trade calls it a fake two-piece hem. Standing still you see a fine contrast line at the edge; reach, turn a cuff, or move in it and the colour underneath shows properly. That is the detail that separates custom contrast polo shirts from a plain polo at very nearly the same cost, and it is why the shirt looks designed rather than bought in.

 

 

Matching Contrast on the Inner Placket and Neck Tape

The colour is carried through to the two places only the wearer normally sees. The inner placket is faced in the same contrast shade, so with the top button open you get colour at the throat instead of a flash of body fabric. The back neck tape — the binding inside the collar — is in the same shade: it is the part that sits against the skin at the neck, and it is also what keeps the collar seam from stretching out over time. Carrying one shade through cuffs, hem, placket and neck is what gives custom contrast polo shirts a single continuous colour story, rather than trim that looks added on afterwards.

For Teams That Want Their Colour in the Garment

Custom contrast polo shirts are for teams that want their brand colour in the garment itself, not only in the logo. A hotel front desk, a retail floor, a catering crew, a club or an event team can pick the stock combination closest to their own colours and get a uniform that reads as theirs the moment someone walks through the door, with no custom-dyed knit and no waiting on fabric. Because the shade runs at the cuffs, hem, placket and neck, you also get a second brand colour in the shirt without printing anything at all.

 

 

Logo Placement on Custom Contrast Polo Shirts

Embroidery is the natural fit on custom contrast polo shirts. A left-chest logo sits on the body fabric, clear of the contrast trim, and double pique gives the stitch enough structure to lie flat without puckering. If your logo shares the contrast colour the shirt reads as a set; a third colour works too, but keep it off the seam where the two layers meet. Large back prints are fine on this fabric. Sublimation is not the right call on a 65/35 blend — the dye sits on the surface instead of bonding into the fibre, so the panel feels heavier than it would on an all-polyester shirt.

Specification Sheet

Attribute Specification
Fabric 65% cotton / 35% polyester
Weight 200 GSM
Knit Double pique (double lacoste)
Contrast detail Under-layer at cuffs and hem, inner placket, back neck tape
Collar Polo collar with contrast back neck tape
Placket Contrast inner placket
Fit Unisex regular block
Sizes XS to 3XL
Stock colours 8
Logo options Embroidery / screen print / heat transfer
Care Machine wash cold, inside out, with similar colours; do not bleach; tumble dry low; cool iron

 

FAQ

Q: Will the contrast trim fade or bleed onto the body fabric?

The contrast layer is cut from the same fabric as the body, just in a different shade, so both sides take dye and wash the same way. Wash cold and inside out with similar colours, as on the care label, and the two shades stay where they are. Dark contrast on a light body is the combination that deserves the most care in the first wash.

Q: Can we change the contrast colour to our own brand shade?

Yes. The stock programme covers eight colour combinations, and if none of them sits close enough to your brand we can develop the body and the contrast shade to your own reference. That covers the fabric and the size run as well, not only the colour.

Q: Does the unisex block run true to size?

It is a regular unisex block, cut for layering rather than for a close fit, and it runs XS to 3XL. Sizing is Asian sizing; if your team is used to EU or US blocks, check the size chart before ordering. Sample first if you are between sizes on the bigger end of the run.

Q: Where should the logo go on a contrast shirt?

Left chest is the safe place: it sits on the body fabric, away from the contrast layer, so the embroidery stays flat. Sleeve logos work too, but keep them above the cuff seam. Avoid the hem entirely — that is where the two layers are joined and there is nothing stable to stitch into.

WhatsApp: 8613760461446WeChat: mdy696Call: +8613760461446Telegram: askme6