Custom Quick-Dry Polo Shirts – Bonded Seams

Custom quick-dry polo shirts in 150 GSM polyester: cool-touch, moisture-wicking, and built for long hot shifts. Bonded collar, placket, cuffs and hem, three snap buttons, S to 4XL in six colours.

From $7.9 +Printing cost ? logo pattern cost depends on design &
craftsmanship. Contact us for quotation!
MOQ 200 pcs
Fabric
cool-touch and moisture-wicking
Composition
100% polyester
Service
In stock. Logo can be added — delivery within 15 days.
Note
Custom made from your design & fabric
Available Sizes
2XL 3XL 4XL L M S XL
Available Colors
Need help? Contact us ›

150 GSM Polyester That Punches Above Its Weight

Custom quick-dry polo shirts at 150 GSM are usually flimsy, and this one is the exception. It is a 100% polyester knit, but the yarn and the construction were chosen for body and coverage rather than for a low figure on the spec sheet, so the number undersells what you feel in the hand. The fabric has a cool-touch hand, moves moisture to the surface instead of holding it against the skin, and dries in a fraction of the time cotton needs. For anyone working outdoors, running a delivery route, or on a shop floor through summer, that is the difference between a shirt that feels damp by mid-morning and one that does not.

Bonded Construction: Fewer Seams, Cleaner Lines

The collar, placket, cuffs and hem are bonded rather than stitched. Bonding fuses the fabric layers with heat and pressure instead of running a needle through them, so every edge sits flat, there is no raised seam to rub against the skin, and the shirt keeps a crisp outline through a full working day. It is the construction premium golf polos and tech-company uniforms use, and it is the reason this shirt reads sharper than a standard uniform polo at a comparable price.

Two-Piece Collar and a Snap Placket

The collar is built shirt-style in two pieces, so it holds its roll and stands up instead of curling after repeated washing. The placket closes with three snap buttons rather than sewn-on ones — faster to fasten, nothing to work loose, and it leaves the clean bonded line unbroken with no buttonhole to stretch or fray. Both side seams are vented at the hem, cut level front and back so the shirt hangs evenly whether it is worn tucked in or left out.


Sizes, Colours and Custom Development

The shirt is a unisex block running S to 4XL, so one style covers a whole team without separate men’s and women’s runs. Six colours are available: Porcelain Grey, Charcoal, Ink Green, Slate Blue, Navy and Black — a deliberately restrained palette suited to corporate and uniform programmes. Please check the size chart on this page before ordering. If the colour range or size run does not cover what you need, we can develop to your specification, from fabric selection through to your own colour standard.

Add Your Logo

Polyester takes all three decoration methods, but on this fabric heat transfer performs best. Sublimation dyes the fibre itself rather than sitting on top of it, so a full-colour or photographic logo will not crack, peel or stiffen the fabric, and it survives repeated washing. Embroidery is the right call for a left-chest mark that needs to look dimensional, and screen printing covers large back graphics and bold single-colour artwork.

Where This Polo Works

  • Summer uniforms for delivery, logistics and field crews — dries fast between shifts
  • Hospitality, retail and front-of-house — the bonded collar holds a sharp line all day
  • Golf days, outdoor events and brand activations — cool, light, and photographs cleanly
  • Private label and wholesale — a repeatable performance style for brands building a technical range

Specification Sheet

Attribute Specification
Style Short-sleeve polo shirt, unisex
Fabric 100% polyester, cool-touch and moisture-wicking
Weight 150 GSM
Collar Two-piece shirt-style collar, bonded
Placket Bonded, three snap buttons
Cuffs Bonded
Hem Bonded, side vents, level front and back
Sizes S – 4XL
Colours 6 stock colours: Porcelain Grey, Charcoal, Ink Green, Slate Blue, Navy, Black; custom dye to your spec
Care Machine wash cold, no bleach, tumble dry low or line dry, do not iron bonded edges
Logo options Embroidery / screen print / heat transfer (sublimation)

FAQ

Q: Is 150 GSM too thin for a uniform polo?

Not with this fabric. Custom quick-dry polo shirts are lightweight by design — that is what makes them cool and quick-drying. This one does not feel thin: the yarn and knit construction were specified for body and opacity rather than for the number on the spec sheet. The darker shades are fully opaque; if you are ordering the lightest colour, ask us for a sample first and check it against your own standard.

Q: What does bonded mean, and will it come apart in the wash?

Bonded means the collar, placket, cuffs and hem are fused with heat and pressure instead of stitched. It holds up through repeated washing, but heat is the enemy: wash cold, tumble dry low or line dry, and never iron directly on the bonded edges. Treated that way, the bond outlasts the garment.

Q: Why snap buttons instead of normal buttons?

Snaps are quicker to fasten, they cannot work loose and fall off, and they keep the bonded placket flat with no buttonhole to stretch or fray.

Q: Polyester or cotton for a hot-climate uniform?

Cotton feels better on first wear, but it holds moisture and dries slowly. Polyester moves sweat to the surface and dries fast, which is why hot and humid markets specify it for daily-wear uniforms. This fabric is also cool to the touch, so it does not have the warm, clingy feel polyester used to have.

Q: Can you make colours outside the six stock shades?

Yes. We can develop to your own colour standard or match a Pantone reference, and adjust the fabric and size run if the stock programme does not cover what you need.

WhatsApp: 8613760461446WeChat: mdy696Call: +8613760461446Telegram: askme6