Cotton Workwear Jackets Supplier: Brushed Twill, Zip Front

Cotton workwear jackets in brushed cotton twill with a zip front, snap placket, contrast flap pockets and a part mesh lining. Unisex, S to 5XL, four colourways. Machine washable.

From $14.8 +Printing cost ? logo pattern cost depends on design &
craftsmanship. Contact us for quotation!
MOQ 200 pcs
Fabric
Cotton brushed twill
Composition
99.9% cotton
Service
In stock. Logo can be added — delivery within 15 days.
Note
Custom made from your design & fabric
Available Sizes
2XL 3XL 4XL L M S XL
Available Colors
Need help? Contact us ›

Brushed cotton twill, warm without the weight

Cotton workwear jackets begin with the cloth, and this one is a brushed cotton twill woven from a heavy yarn count. The brushing lifts a soft nap on the surface, which is why it feels warm and comfortable against the skin rather than slick and cold the way a plain weave can. Cotton breathes, so the jacket stays comfortable on a warm shift indoors as well as out on site, and because the twill is dense it hangs with a bit of body instead of collapsing at the hem. If your team works through autumn and winter, or in a workshop that never quite warms up, this is a jacket that earns its place.

 

Stand collar, covered zip and a snap placket

The collar is a plain stand collar, cut clean and left unfussy, so it can be worn down or turned up against a draught. A full-length zip runs from the collar to the hem, and a storm placket covers it so draughts do not drop through the teeth. On cotton workwear jackets the placket closes with two snaps at the top and one at the bottom, which holds the flap flat all the way down instead of letting it curl open. The inner face of the placket is cut in the contrast colour, so an open jacket shows a flash of the second colour down the front.

Flap chest pockets, slanted pockets and a pen slot

Two patch pockets sit on the chest, each closed with a flap, and both the flaps and the pocket bodies are cut in the contrast colour, so the front reads as more than one flat block of fabric. Lower down, a slanted pocket sits at each side of the front, and a slim contrast strip runs along the pocket welts. The upper left sleeve carries a pen slot under its own small flap, handy when you need a pen to hand rather than digging in a pocket. None of it is decoration for its own sake: every pocket on cotton workwear jackets is placed where a hand naturally reaches.

 

A part mesh lining, and how far it reaches

Inside, cotton workwear jackets are partly lined rather than fully lined, and that is deliberate. The front panels and the upper back carry a mesh lining, which adds a smooth layer over the cotton, while the lower back is left unlined so the cotton sits directly against whatever you wear underneath. The trade off is simple: mesh at the top breathes and keeps the jacket from feeling heavy, and a single layer across the lower back holds the overall weight down and stops the back running hot. Inside the left chest there is a double welt pocket, and low on the left front a rectangular patch pocket with a flap.

 

Sizes, colours, logos and the matching trouser

Cotton workwear jackets are cut in a unisex block from S to 5XL and held in four colourways: royal blue with grey, navy with red, navy with grey, and khaki with coffee. The jacket is supplied on its own or as a jacket and trouser set, and the matching work trouser comes in navy with belt loops and a zip fly. Logos can go on by print or by embroidery: a chest badge or a name works well in embroidery, and larger artwork for the back goes on by heat transfer print or screen print. Send us your artwork and we will confirm the best method for the placement. If the stock colours and sizes do not cover your team, cotton workwear jackets can be made in your own colourway and size run. Please check the size chart before ordering.

Specification sheet

Attribute Specification
Type Long sleeve workwear jacket
Fabric Brushed cotton twill, heavy yarn count
Composition 100% cotton
Fabric properties Soft brushed face, breathable, warm, comfortable hand
Collar Stand collar
Front Full-length zip from collar to hem, covered by a storm placket with snaps (two at the top, one at the bottom)
Chest pockets Two patch pockets with flaps, cut in the contrast colour
Hip pockets One slanted pocket at each side, with a slim contrast strip along the welt
Sleeve pocket Pen slot with a flap on the upper left sleeve
Lining Part mesh lining: front panels and upper back lined, lower back unlined (single layer)
Inside pockets Double welt pocket at the left chest; rectangular patch pocket with a flap low on the left front
Contrast placement Chest pocket bodies and flaps, placket inner face, pocket welt strip, inside back yoke and front facings
Back Yoke across the upper back
Matching trouser Work trouser in navy with belt loops and a zip fly, one pocket at each side, two double welt pockets at the back
Fit Unisex
Size range S to 5XL
Stock colours 4: Royal Blue with Grey, Navy with Red, Navy with Grey, Khaki with Coffee
Decoration Print or embroidery
Care Machine wash cold, mild detergent, do not bleach, hang dry, low iron, wash dark colours separately

 

 

FAQ

Q: What is this jacket made of?

It is a brushed cotton twill, 100% cotton, woven from a heavy yarn count. The brushing gives it a soft nap, so it feels warm and comfortable rather than slick, and cotton keeps it breathable on a warm shift indoors.

Q: Is the jacket fully lined?

No, it is partly lined. The front panels and the upper back have a mesh lining, while the lower back is left unlined so it stays light and does not run hot. The mesh adds a smooth layer where it matters most, and the single layer across the back keeps the whole jacket light.

Q: Does it shrink in the wash?

It holds its size through normal washing. Machine wash cold with a mild detergent, do not bleach, and hang dry rather than tumble dry.

Q: Can you print or embroider a logo?

Yes, either. A small chest badge or a name works well in embroidery, and larger artwork for the back goes on by heat transfer print or screen print. Send us your artwork and we will confirm the best method for the placement.

Q: Is the trouser included?

The price shown is for the jacket on its own. The same jacket can be supplied as a jacket and trouser set, and the matching work trouser comes in navy with belt loops and a zip fly. Contact us and we will quote the set and send you photos.

Q: How should I wash it?

Machine wash cold with a mild detergent, do not bleach, hang dry, and use a low iron if needed. Wash dark colours separately.

 

WhatsApp: 8613760461446WeChat: mdy696Call: +8613760461446Telegram: askme6